Purchase Thick Shelf Brackets Here
Single Bay Shelving Unit Dimensions
Single Bay Shelving Unit Part List
Double Bay Shelving Unit Dimensions
Single Bay Shelving Unit Part List
Step 1 - Cut plywood sheet into 30" strips.
Step 2- Cut the 30" wide strips into 10-3/4" deep shelves.
Step 3 - Cut the vertical supports and shelf fronts to length..
Step 4 - Mark out the holes you will pre-drill.
Step 6 - Drill pocket holes into the back of the shelves which will be used to attach the shelf fronts.
Step 7 - Screw the shelves and shelf fronts together.
Step 8 - Mark out holes on either side of each shelf.
Step 9 - Pre-drill holes in the side of each shelf.
Step 10 - Screw the Self Made brackets into the side of each shelf.
Step 11 - Screw through the brackets on each shelf into the vertical supports.
Step 12 - Stand the shelf up and mark out drywall anchor locations on the wall.
Step 13 - Install drywall anchors in the wall in the locations marked out in the previous step.
Step 14 - Tighten drywall anchor.
Step 15 - Unscrew drywall anchor screw in preparation for mounting the shelving unit.
Step 16 - Screw through the brackets into the drywall anchor to mount the shelves.
Step 17 - Enjoy, you're DONE!